How To Find Gateway Address

Posted : admin On 1/26/2022
  1. How To Get My Default Gateway
  2. How To Find Gateway Address On Pc
  3. How To Find Gateway Address From Ip

How to Locate IP, Gateway, Subnet and DNS Information

An Internet Protocol (IP) address is a unique number that can identify each host (computers, routers, switches, etc.) on a network. When a host sends information to the IP address of a second receiving host it includes IP of origination, IP of destination and other information. Knowing the IP address of key network components such as routers, firewalls and servers, can be useful when troubleshooting network problems. Use of utilities like Ping or Trace Route can help isolate problem areas.

A simple method If you like to use a simple method and find the default gateway IP address, then you can use the ipconfig command in the command prompt as follows. Open the Command Prompt. Find out Gateway / router IP address under Linux / UNIX using route command You need to use the router command command. This command can manipulate the kernel’s IP routing tables. It can also be used to print gateway/router IP address. Checking the local IP address of your Linksys gateway is useful when: Accessing the gateway’s web-based setup page; Assigning a static IP address on a computer to determine what IP range and Default Gateway to assign to the computer. To find the local IP address of a Linksys gateway, you need to perform three (3) steps.

A knowledge of relevant network topology and settings including DNS, gateway and subnet mask can also be useful when exploring network issues.

Domain Name Service (DNS) numbers are IP addresses that a workstation or server uses to refer to specific servers that resolve domain names to IP addresses.

A gateway IP refers to a device on a network which sends local network traffic to other networks.

The subnet mask number helps to define the relationship between the host (computers, routers, switches, etc.) and the rest of the network.

System Requirements

IP addresses are a part of the Transmission Control Protocol/Internet Protocol (TCP/IP) suite of protocols and will be present on every system that is connected to the Internet. The IP protocol is installed by default on most operating systems.

Windows 95/98

  1. Select Start >Programs >DOS Prompt

  2. In the resulting command line window, type winipcfg.

    A new window will open up displaying IP network information for that host.

  3. In the first selection box, click on the down arrow and select the proper network interface. There will be a network connection listed for a dial-up, and one listed for each network card installed in the computer.

  4. Click on the More Info button to see additional IP information.

  5. To view additional DNS information click on the box next to the first DNS number marked '...'.

Windows NT/Me/2000/XP

  1. Select Start > Run. Type command into the dialog box, then click OK.
  2. In the resulting command line window, type ipconfig /all.

C:>ipconfig /all

Windows 2000 IP Configuration Host Name . . . . . . . . . . . . : tss-avery-babel Primary

DNS Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . :

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-01-03-AB-0E-6P
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . :
Subnet Mask . . . . . . . . . . . :
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . :
DNS Servers . . . . . . . . . . . : Primary
WINS Server . . . . . . . :
Secondary WINS Server . . . . . . :
Lease Obtained. . . . . . . . . . : Wednesday, January 1, 2003 11:17:41 AM
Lease Expires . . . . . . . . . . : Friday, January 3, 2003 11:17:41 AM

The IP address will be listed in the current command line window. Other information such as the gateway address and DNS numbers will also be displayed.

Mac OS 8-9.x

  1. Click on the Apple Menu (in the upper left corner of the display) > Control Panel > TCP/IP.

    A new window will open, the TCP/IP Control Panel. This window will contain information such as IP address, subnet mask, router address (gateway), name server address (DNS) and other IP information.

Mac OS 10.x

  1. Click on the Apple Menu > System Preferences.

  2. Click on Network.

    If the network settings are grayed out select the click the lock to make changes button. Then enter in the admin account name and password to proceed with viewing the network settings.

  3. Choose the ethernet port by clicking the double arrows next to Show Fields and select Built in Ethernet.

  4. Click on the TCP/IP tab.

    The IP address, subnet mask, router (gateway) and domain name servers (DNS) will be displayed in the active window.

Novell 4.11-6

At the System Console screen, type config.

The last two lines of the information displayed on the screen will be the IP address and the subnet. To find the DNS numbers and gateway, follow these steps:

  1. At the System Console screen, type loadinetcfg.nlm. The Internetworking Configuration tool will launch.

  2. Select Protocols > TCP/IP. Press Enter and the TCP/IP Protocol Configuration window will display.

  3. Press the down arrow to LAN Static Routing Table. Press Enter.

  4. The default route listed will be the gateway address.

  5. Press Esc until the TCP/IP Protocol Configuration window is again visible.

  6. Press the down arrow to DNS Resolver Configuration. Press Enter.
    The three DNS numbers, along with the name of the server, will be listed here. Press Esc four times and press Enter to exit out of inetcfg back to the main console screen.


Note: Root access may be required to run these commands. These commands will all be launched from the command line.

How to find gateway address for wifi
  1. Launch a command line interface. (This will vary depending on operating system distribution.)
  2. In the resulting command line window or screen, type ifconfig.
  3. Press Enter.

For example:

Typing ifconfig at the command line:

[[email protected] /home]# ifconfig

Will result in something similar to the following:

eth0 Link encap:Ethernet HWaddr 00:10:5A:1A:DC:65
inet addr: Bcast: Mask:
RX packets:18940 errors:1 dropped:0 overruns:0 frame:2
TX packets:11554 errors:0 dropped:0 overruns:0 carrier:0
collisions:2 txqueuelen:100
RX bytes:4087250 (3.8 Mb) TX bytes:2499423 (2.3 Mb)
Interrupt:11 Base address:0xd000

In the example above, the IP address is labeled inet addr:

The subnet mask is listed as Mask:

The location of the gateway address can be found by typing netstat -rn at the command line. The output will look similar to:














The gateway IP in the above instance is

DNS information is most often found in a text file called resolv.conf. This file can be read using the cat command. A common place for this DNS file is:

/etc/resolv.conf although the name and location of this file may vary by Linux distribution.

To access this file type:

cat /etc/resolv.conf

The output will display the DNS numbers assigned to the machine, in this case:


Other IP Tools and Information — Shows the IP address of the host machine visiting the link. (May show the IP address of a firewall instead of the local machine, if the local machine is behind a firewall.)

How To Get My Default Gateway

Posted in Technology • 5 years ago • Written by • No Comments

Every user of computer has to gain knowledge of the role of every resource in the computer network in detail. This is because they can take advantage of all these resources efficiently. Almost every resource in the computer network is identified by a unique address namely Internet Protocol (IP) address.

This numerical label is very helpful to each resource for communicating with each other in the computer network and the World Wide Web. There are two principal functions involved in the IP address. These functions are location addressing and network interface identification. An IP address is used to indicate

  • What we seek
  • Where it is
  • How to get there

Internet Protocol Version 4 (IPv4) is the main system designed by Internet Protocol designers for defining a 32-bit number. Nowadays, Internet Protocol Version 6 (IPv6) is used. This new version uses 128-bit instead of 32-bit used by IPv4. All IP addresses are managed by the IANA – Internet Assigned Numbers Authority. This panel assigns blocks of IP addresses to Internet Service Providers otherwise known as local Internet registries.

Many individuals search for the role of the ip address nowadays. This IP address is one among the default IP addresses of routers. Many organizations and users of home broadband networks make use of this private IP address. Routers with the default IP address are very helpful for those who wish to manage each resource in the computer network perfectly.

France Telecom Services Offers uses IP address and Internet from the Orange ISP. This router IP address aids in the most efficient performance of the computer networking. Thus, many users of routers nowadays try to gain knowledge of this IP address eagerly.

A gateway

A gateway is an important network point. This entity acts as a doorway to another network. Every resource in the computer network is called as a node. Each node can be either a host node or a gateway node.

Host nodes are computers used by Internet users and computers that act as servers. On the other hand, gateway nodes are computers used to control the whole traffic within the particular network or at the local Internet Service Provider.

A default gateway

A default gateway plays the most significant role in the computer networking. This node has the most excellent stuff to know how to steer packets from one network to another network efficiently.

There is a default route setting in many nodes like network devices, workstations and servers of the TCP/IP network. These nodes are pointing to the default gateway and defining where they have to send data packets by using IP addresses. In general, the gateway is a router because it routes data packets from the sender node to the receiver node by using IP addresses.

Cable router or DSL router in the home network or small office environment is used to connect the local network to the Internet. These resources act as the default gateway for every resource in the network. The default gateway only supports each resource to communicate with any resource in the Internet.

Every default gateway forwards data packets from the sender node to a series of default gateways in the Internet towards the receiver node. These default gateways act as firewalls and proxy servers individually.

Know the IP address of the default gateway

The default gateway is usually a router in the business network and home network. The web based management of the router is very important to troubleshoot any genre of network problem.

Every default gateway has a private IP address. This private address is mostly assigned to the router in the computer network. The default gateway or router uses this private IP address for communicating with the local home network every time.

You may have geared up to identify the IP address of your default gateway and seek how much time required for this process. You have to spend no more than a few minutes for identifying the default gateway IP address on your own.

Large networks use more than one router, an array of network hubs and different gateways to deal with the most complicated routing. If you have small business network or home network of wired or wireless type, then you can listen to the following details. You will get the most expected support to be aware of the private IP address of the default gateway or router.

  • Open Control Panel
  • Click on the Network and Internet link or Network and Internet Connections link.
  • Click on Network and Sharing Center link or Network Connections link
  • Click on Change adapter Settings link or Manage network connections link
  • Locate the relevant network connection on the Network Connections screen
  • Double-click on the network connection
  • Click on Details… button in the Connection’s Status Window. If you use Windows XP, click the Support tab and get the Details… button.
  • Locate the IPv4 Default Gateway or advanced version available under the Property column.
  • Now, IP address is listed as the property’s Value. This IP address is the default gateway IP address used by your Windows operating system currently.

You can make use of this default gateway IP address to troubleshoot a connection problem and access the router directly. You can also perform other tasks when you use this IP address properly.

A simple method

If you like to use a simple method and find the default gateway IP address, then you can use the ipconfig command in the command prompt as follows.

  • Open the Command Prompt
  • Type in ipconfig
  • Execute the command
  • Take note of the default gateway IP address under the most relevant connection

How To Find Gateway Address On Pc

You may prefer the wired connection and seek the IP address of the default gateway. You will get a list of details of IP addresses of various resources in ipconfig results. For example, you can get the Link – local IPv6 address, IPv4 address, subnet mask and default gateway IP addresses. This simple method gives you the best support to be aware of the default gateway IP address.

About the Author:

Hi , My name is Masha and I am is passionate about technology, internet marketing and I am writer who writes on computer technology questions like router settings, computer security, ip address and many more questions about computer problems. Check this site to find more information about ip address

How To Find Gateway Address From Ip

You Might Also Like: