At the bottom, you can find the IP under “IP Address” section. In case you need a dedicated app for this, you can check out IP Tools. Once you have installed it, simply open the app. Swipe right to bring up the additional menu and look for IP detection option, there you’ll find your IP address written next to Internal IP. Look for 'Internet Port' or 'Internet IP Address. ' You should find it on the Router Status, Internet, or WAN page. The IP address is 4 sets of digits, with up to three digits per set, such as 22.214.171.124. This is the IP address that your router is assigned by the ISP.
Ipconfig command is used to find the IP address of a system from command line. Run the command
ipconfig to print IP addresses for all network adapters installed on the system.
If you are interested in just knowing the IP address and not bothered about all other details printed by the command, you can use findstr to filter out unwanted details.
Here, it shows IP addresses for various interfaces installed on the computer, it includes IPv6 interfaces as well.
How To Find Out Ipad Model
If the system is connected to a DHCP configured network then you can release the IP obtained from DHCP.
How To Find Out Ipad Capacity Without Turning On
The above command works for IPv4. To release IPv6 address the command is given below.