My Gateway Address

Posted : admin On 1/25/2022

It’s effortless to check your IP address, Subnet Mask, and Default Gateway. You can check on any system. Open your Computer and click on the start button. Now, select the option.Run. Select the TCP/IP tab and find your gateway IP address listed next to Router. Click the Spotlight icon (at the top right of the screen). Type Terminal and hit Enter when it appears. Type the following command netstat -nr grep default in the Terminal application. Find your gateway IP address listed next to Default. An IP address is similar to the unique telephone number on your home phone or mobile device. The difference is that it consists of four segments called octets that are separated by a period. The numbers within each octet range between 0 and 255. Here's an example of a typical IPv4 address: 192.168.40.39. In this video we show you how to change your Government Gateway personal information, including your name, email address, password and recovery details.

In just a few seconds you can check your IP address, Subnet Mask and other information using a code in Command Prompt. I have shared this guide step by step to check your all vital computer address. Do check this article and follow all the steps to check your IP Address etc.

Contents

What is IP Address?

IP Address is known as Internet Protocol. Every computer is given a unique IP Address. This IP Address helps us in identifying the specific network. You must have heard the news, when a gangster, terrorist, etc. send an email to a government office for attack or targeting any individual. Every thought how they are caught?. Well, it’s because of their IP Address. Similarly, Subnet Mask and Default Gateway help IP Address in sending receiving files and routing. Now, the question arises what my Ip address is?.

Read more: How to trace an IP Address from Facebook Profile

How to check your IP Address – Find Subnet Mask and Default Gateway on PC/Laptop

It’s effortless to check your IP address, Subnet Mask, and Default Gateway. You can check on any system.

  1. Open your Computer and click on the start button.
  2. Now, select the option *Run*.
  3. Write*cmd* and press *OK*.
  4. A Black window will appear.
  5. Now, write *ipconfig* and press enter.
  6. It will show you the Windows IP Configuration.

Yes, you have done it. Your IP Address is in front of you. You can also see Subnet Mask and Default Gateway on the same screen.

Trending: How to Increase WiFi Signal Strength and speed

There is one more method to check your IP address, Subnet Mask and Default Gateway in which you can also check your preferred DNS server and alternate DNS server.

Check your Preferred DNS server and Alternate DNS server

  1. Click on *START*.
  2. Now, select Control Panel.
  3. Click on Network Connections.
  4. You will see the Local Area Connection.
  5. Right-click on that and select properties.
  6. Now. Click on the option Internet Protocol [TCP/IP]
  7. Now you can see all your IP and DNS server.

Read more: SafeDNS vs OpenDNS

Conclusion

These are the best way to check your IP address, Subnet Mask, Default Gateway, Preferred DNS server and Alternate DNS server. You can also share your method to check IP Address, etc. The comments section below. And do share this article with your friends.

YesNo

Find My Gateway Address Mac

It's important for you to know the internal IP address of your default gateway, which is normally your router's LAN IP address.

My default gateway address

If you have ever had to access your router to configure it, you should know the address. It's what you type in your browser address bar to reach the configuration interface (example: http://192.168.1.1/) and, if not, you can find it with the following steps:

  • Windows:
    • Click Start > All Programs > Accessories > Command Prompt.
    • When Command Prompt is open, type the following command: ipconfig findstr /i 'Gateway' (You can copy & paste it in the command prompt; just right-click anywhere in the command prompt window and select Paste.)
    • You should see something like this:
      C:Documents and Settingsadministrator>ipconfig findstr /i 'Gateway'
      Default Gateway . . . . . . . . . : 192.168.1.1

    • In this example, your default gateway (router) IP address is 192.168.1.1.


  • Linux:
    • You'll need to open a Terminal. Depending on your Linux distribution, it can be located in the menu items at the top, or at the bottom of your screen. In this example, we will use Fedora. Click Applications > System Tools > Terminal.
    • When terminal is open, type the following command: ip route grep default
    • The output of this should look something like the following:
      joe$ ip route grep default
      default via 192.168.1.1 dev eth0 proto static

    • In this example, again, 192.168.1.1 is your default gateway (router) IP address.


  • Mac OS X:
    • Open the Terminal application. Do do this, click Finder > Applications > Utilities > Terminal.app.
    • When Terminal.app is open, type the following command: netstat -nr grep default
    • This will output the following:
      joe$ netstat -nr grep default
      default 192.168.1.1 UGSc 50 46 en1

    • In this example, again, 192.168.1.1 is your default gateway (router) IP address.

My Gateway Address

Retrieved from 'https://wiki.amahi.org/index.php?title=Find_Your_Gateway_IP&oldid=35899'