My Public Ip Address Is Different From Router

Posted : admin On 1/25/2022
-->
  1. My Public Ip Address Is Different From Router Connection
  2. Ip Address Different From Router
  3. Do Routers Have Different Ip Addresses

Public IP addresses can be routed on the Internet, unlike private addresses. The presence of a public IP address on your router or computer will allow you to organize your own server (VPN, FTP, WEB, etc.), remote access to your computer, video surveillance cameras, and get access to them from anywhere on the global network. The network settings page of my only router/modem reports that my WAN IP is '10.14.99.48'. My service works on this IP, but the outside world cannot access it. My service works on this IP, but the.

Applies to: Windows 10, Windows Server 2016

When you connect to your PC by using a Remote Desktop client, you're creating a peer-to-peer connection. This means you need direct access to the PC (sometimes called 'the host'). If you need to connect to your PC from outside of the network your PC is running on, you need to enable that access. You have a couple of options: use port forwarding or set up a VPN.

Enable port forwarding on your router

Port forwarding simply maps the port on your router's IP address (your public IP) to the port and IP address of the PC you want to access.

Specific steps for enabling port forwarding depend on the router you're using, so you'll need to search online for your router's instructions. For a general discussion of the steps, check out wikiHow to Set Up Port Forwarding on a Router.

Before you map the port you'll need the following:

  • PC internal IP address: Look in Settings > Network & Internet > Status > View your network properties. Find the network configuration with an 'Operational' status and then get the IPv4 address.

  • Your public IP address (the router's IP). There are many ways to find this - you can search (in Bing or Google) for 'my IP' or view the Wi-Fi network properties (for Windows 10).

  • Port number being mapped. In most cases this is 3389 - that's the default port used by Remote Desktop connections.

  • Admin access to your router.

    Warning

    You're opening your PC up to the internet - make sure you have a strong password set for your PC.

After you map the port, you'll be able to connect to your host PC from outside the local network by connecting to the public IP address of your router (the second bullet above).

The router's IP address can change - your internet service provider (ISP) can assign you a new IP at any time. To avoid running into this issue, consider using Dynamic DNS - this lets you connect to the PC using an easy to remember domain name, instead of the IP address. Your router automatically updates the DDNS service with your new IP address, should it change.

With most routers you can define which source IP or source network can use port mapping. So, if you know you're only going to connect from work, you can add the IP address for your work network - that lets you avoid opening the port to the entire public internet. If the host you're using to connect uses dynamic IP address, set the source restriction to allow access from the whole range of that particular ISP.

You might also consider setting up a static IP address on your PC so the internal IP address doesn't change. If you do that, then the router's port forwarding will always point to the correct IP address.

Use a VPN

Router

If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC. There are a number of VPN services available - you can find and use whichever works best for you.

Hi people!
I am using a TL-MR6400 4G Router model and I cannot get DuckDNS to work. I recently saw that there is a big problem with the router in how it shows the Public IP Address and I believe that this is the main problem why I cannot use Duck DNS

As you can see from the first image, when I go to Basic -> Internet or Advanced -> Internet, the IP Address that is shown starts with 10.154.XXX.XXX. From what I discovered, this is an internal / private IP address like 192.168.XXX.XXX and not an external / public IP address. I also looked at this tutorial just to be certain that I looking where I should. How to set up Port Forwarding on a TP-Link router.

As you can see from the second image, IP Lookup sites see my Public address as being one that starts with 213.233.XXX.XXX.

My Public Ip Address Is Different From Router Connection

So in the router settings, shouldn't I see my my public IP address instead of something totally different?
BTW, the router internal address is 192.168.1.1, and the public address is 213.233.XXX.XX as you can see below, so I don't know where that 10.154.XXX.XXX is from.

Ip Address Different From Router

Any suggestions is truly appreciated!

Do Routers Have Different Ip Addresses

zews