Usb Digital Clock

Posted : admin On 1/25/2022

Downloads

    • DDSTimeNet-2.5 – FOR CLOCKS MANUFACTURED ON OR AFTER 05/2019 PC software for ERR time zone clocks with electronic LED zone names.
    • DDSTimeNet-2.1 – FOR CLOCKS MANUFACTURED BEFORE 05/2019 PC software for ERR time zone clocks with electronic LED zone names.
    • DDSTimeNet-M-2.1 – PC software for ERR time zone clocks with electronic LED zone names and rotating zones capability. (Denoted with M in model part number)
    • DDS Timenet Message Board – PC software for Message Board.
    • USB to RS485 Driver – Install driver to connect clock to USB serial adapter (only works for DDS-tested USB cables)
    • Legacy USB Driver – Legacy USB Driver for products older than 2010.

    Instruction Manuals

    • For Standalone Clocks (BSA), Calendar Clocks (BCL/BJL), and Network Clocks (MGP/BRS)
    • For Time Zone Clocks with White Vinyl Zone Names (BTZ-VX)
    • For Time Zone Clocks with Electronic Zone Names (BTZ-EXX)
      • DDS TimeNet-2.1 Software Install Guide – How to install PC software
      • DDS TimeNet-2.1 Instructions – How to setup clock using software
    • Other

Slow down your pace and enjoy life. Optional LED color: White, Green, Blue, red. Battery: CR2032 button battery. Note: The real color of the item may be slightly. Compact Digital Alarm Clock with USB Charger Black - Capello. 2.6 out of 5 stars with 78 ratings. Digital Mantle Alarm Clock Lark Finish - Capello.

Rocam Digital Alarm Clock for Bedrooms - Large 7' LED Display with Dimmer, Snooze, 7 Color Night Light, Easy to Set, USB Chargers, Battery Backup, 12/24 Hour for Kids, Boys, Heavy Sleepers (Blue) $49 73 Press the light bar on top of the large display alarm clock case to pick one of seven nightlight colours. Shop for alarm clock with usb port at Bed Bath & Beyond. Buy top selling products like iHome® Qi Wireless Charging Compact Alarm Clock in Black with USB Port and Digital Alarm Clock with 2 USB.

MC-3+ Smart Clock USB

The MC-3+ USB sets a new benchmark for clocking technology and digital audio reproduction by uniquely combining an audiophile digital audio interface, master clock, and audio re-clocker. Using a higher quality clock source allows for more accurate playback timing between samples in the digital audio stream. Any drifting or inaccuracy between each sample creates phase-noise and jitter, resulting in degraded imaging and audio quality. By improving the clock sync reference and conversion of your digital signal, your playback system will provide increased precision, clarity, and improved sound stage. The MC-3+ USB presents a user friendly, compact format, where you can achieve high quality re-clocking and conversion previously limited to more costly hardware.

Versatile Digital Matrix

The MC-3+ USB enables bi-directional digital audio format conversion between USB audio streams, AES3, AES3id, and S/P-DIF signals. In addition to an array of digital outputs, there is a full set of digital inputs for AES3, AES3id, and S/P-DIF signals with BNC, RCA, and optical connectors. USB audio streams are converted to five digital audio outputs, allowing multiple devices to receive the same audio simultaneously. Please note the MC3+ USB features only digital audio outputs, none are analog.

Re-Clocking

Clock

The MC-3+ has its own built-in re-clocking capability or can sync to a higher rate clock device such as the 10 Mhz MUTEC REF 10. By using MUTEC’s proprietary 1G-Clock technology, the incoming audio is reproduced more accurately resulting in improved fidelity, imaging, and precision. The MC-3+ USB also includes clock outputs, allowing to act as a clock distributor to multiple devices in the studio or live sound.

USB Made Better

Usb Charging Digital Clock

Many converters are not capable of reproducing and converting audio via USB at the highest possible level, which is why using digital audio inputs such as AES3 or S/P-DIF yields significantly better results and is usually preferred. MUTEC has invested considerable research to uncover and solve the underlying problems to achieve high-end audio via USB.

Ultra Low Noise

Electromagnetic interference of any kind, particularly such as that caused by computers, will induce noise into the audio stream. The MC-3+ USB incorporates a USB interface galvanically isolated from other parts of the circuitry. The power supply is also independent from the main board, with other components in the main circuit also isolated, resulting in exceptional noise reduction previously not thought possible.

Applications using the MC-3+ USB as a master clock source

Applications using the MC-3+ USB in re-clocking mode

Optional Applications syncing the MC-3+ USB with External clock reference

Features:

Sharp digital alarm clock manualSmall digital clock stick on
  • Unique, bit-transparent “Revive” Re-Clocking for purest sound quality
  • Serves as a flexible digital input switching matrix, audio format converter and master clock
  • Intuitive user interface and easy setup
  • Update-capability via USB
  • Galvanic isolation up to 2500 VRMS in accordance with UL1577, respectively 4242 VPK in accordance with DIN EN 60747-5-2 (VDE 0884 part 2)
  • Converts DSD/DoP streams (64-256) to PCM audio with selectable output clock rate
  • Transfers USB audio streams into AES3 and S/P-DIF and outputs those to five digital audio formats simultaneously
  • Converts between USB PCM audio, USB DSD/DoP audio, AES3 and S/P-DIF, as well as between AES11 and Word Clock
  • MAC/PC compatible
  • USB audio class 2.0 driver for Windows supporting ASIO, MME, DirectSound, WASAPI, Kernel Streaming, PCM 16Bit, 24Bit, 32Bit and Float-32Bit at all clock rates between 44.1kHz and 192kHz
  • Ultra-low jitter Word Clock generation with clock rates up to 1,536.0 kHz
  • Scale-able to FS1x512 clock rates, 22,5792 MHz & 24,576 MHz, for e.g. high-end audio interfaces
  • Locks to 10 MHz, 5 MHz, and GPS clock references
  • Generates Word Clocks, Super Clocks, AES3 + S/P-DIF blanks simultaneously
  • Uninterruptible, fail-safe clock generation in all operation modes
  • Eliminates so-called digital “clicks and pops”
  • Individual lock indicators for the clock or audio reference and the re-clock reference
  • S/P-DIF interconnections via BNC, RCA and optical interfaces available as inputs and outputs
  • Front panel lock-out for preventing of misuse
  • Rack-space-saving 9.5″ housing, 1u rackmount kit available
  • Built-in, universal power supply
  • Made in Berlin, Germany

Click here to download info sheet PDF

Online clock

Product Manual PDF

Download a quick start guide: MAC – WINDOWS

Read a review from German Recording Magazine – LINK

Usb

Usb Digital Clock Automotive

Now approved as a Roon Tested device! – LINK

Usb Powered Digital Clock

Images (click to expand)

Small Digital Clock Stick On

Black Front View
Aluminum Front View
Rear View

MC3+ USB and REF 10 Master Clock